(NEW) 2 PCS. CHARGING STATIONS, SCHNEIDER CHARGE, 1P+N/3P+N, T2S SOCKET, 7.4/11/22 kW, 16/32 A

Note! The charging station must be connected via an RCD.

Schneider Charge is a wall-mounted charging station for electric vehicles that complies with the IEC 61851-1 standard. The IP rating is IP55. The IK rating is IK10. The operating temperature is between -35°C and 55°C. The output type is a T2S socket on the front of the charging station. Rated charging power is 22 kW. The charging station can be installed either single-phase (1P+N) or three-phase (3P+N). The rated charging current is 16 A/32 A at 230 VAC/400 VAC and 50 Hz/60 Hz mains frequency. It can be connected to a TN-S, TT or IT earthing system. The charging station is easy to install (no special tools required). It is recommended for private home use, installed in the garage or on an exterior wall. The dimensions are (W) 244 mm x (H) 352 mm x (D) 117 mm. Product weight is 3.2 kg. Colour is white (RAL 9003) and green. The charging station is equipped with built-in residual direct current protection (RDC-DD). An LED indicator on the charging station changes colour between red, green and blue to indicate status directly on the charging station. Together with the Schneider Charge Load Balancing Unit, it is possible to adjust in real time the maximum power allocated to the charging vehicle, taking into account the rest of the household's electricity consumption and the size of the main fuses. The OCPP 1.6 communication protocol can be used to connect the charging station to third-party cloud services and mobile applications. For internet connectivity, either Wi‑Fi or an RJ45 Ethernet cable is used. The dimensions are (W) 244 mm x (H) 352 mm x (D) 117 mm. Weight is 3.2 kg. Colour is white (RAL 9003) and green. Equipped with protection against residual direct current (RDC-DD). There is no access control for using the charging station to charge an electric vehicle. An LED changes colour between red, green and blue to indicate charging status directly on the charging station. This function makes it possible to adjust in real time the maximum power allocated to charging the electric vehicle, based on the consumption of other loads in the house, as well as adapt the load according to off-peak and peak periods sent by TIC. The charging station is connected to Wiser via the Schneider Electric™ mobile application for home energy management. It makes it easy to start, monitor and control the charging process remotely. The OCPP 1.6 communication protocol can be used to connect to the monitoring unit/third-party cloud. It can also be connected to the home router for internet access, either via Wi‑Fi or an RJ45 Ethernet cable.
Note! The product is a return and may therefore have damaged packaging.